New model for 2020. This machine uses the Ballisti-Cast style molds to cast bullets, slugs or pellets.
The newly designed machine has state of the art electronics, up to 6 molds can be used at the same time or just use one mold and turn the pour off of the remaining five. Up to 5000 bullets per hour and separates the sprues and the bullets into different trays. 9mm molds run around 3000 per hour, heavier bullets fill take longer to cool the lead so machine is slowed down.
- Digital Controls
- State of the art electronics
- UL listed electronics
- 3600 watts of heating power
- 150 pound pot capacity
- 240 volt, 16 amps, single phase
- Blowers to cool sprues
- Up to 6 molds at a time
- Turn off molds not wanted to pour
- Up to 5000 bullets per hour/3000 for 9mm for example
- Ballisti-Cast style mold blocks
- NEMA L620 Plug
Please email for information about ordering our machines. Payments can be made by check or wire transfer. Checks must clear funds prior to shipping. Credit cards on not accepted for machine purchases.
You will need to have 20 amp 220v power for this unit and purchase casting molds. You can use one mold at a time or up to 6. Each mold station should have a mold in it's place but the pour can be turned off for any mold not wanting to be used. Different molds can be used at same time but would need to be similar in weight since they will all receive the same amount of lead pour time.